# Exercise:Softmax Regression

### From Ufldl

## Contents |

## Softmax regression

In this problem set, you will use softmax regression on pixels to classify MNIST images. However, since you will also be using softmax regression for the Self-Taught Learning exercise later, your implementation should be a more general implementation that works on any arbitrary input.

In the file `softmax_exercise.zip`, we have provided some starter code. You should write your code in the places indicated by "YOUR CODE HERE" in the files. The only file you need to modify for this exercise is is `softmaxCost.m`.

### Step 0: Initialise constants and parameters

Two constants, `inputSize` and `outputSize`, corresponding to the size of each input vector and the number of class labels have been defined in the starter code. This will allow you to reuse your code on a different data set in a later exercise. We also initialise `lambda`, the weight decay parameter here.

### Step 1: Load data

The starter code loads the MNIST images and labels into inputData and outputData respectively. The images are pre-processed to scale the pixel values to the range [0,1], and the label 0 is remapped to 10 for convenience of implementation. You will not need to change any code in this step for this exercise, but note that your code should be general enough to operate on data of arbitrary size belonging to any number of classes.

### Step 2: Implement softmaxCost

In softmaxCost.m, implement code to compute the softmax cost function. Since minFunc minimises this cost, we consider the **negative** of the log-likelihood , in order to maximise . Remember also to include the weight decay term in the cost as well. Your code should also compute the appropriate gradients, as well as the predictions for the input data (which will be used in the cross-validation step later).

**Implementation tip: computing the ground truth matrix** - in your code, you may need to compute the ground truth matrix `M`, such that `M(r, c)` is 1 if *y*^{(c)} = *r* and 0 otherwise. This can be done quickly, without a loop, using the MATLAB functions `sparse` and `full`. `sparse(r, c, v)` creates a sparse matrix such that `M(r(i), c(i)) = v(i)` for all i. That is, the vectors `r` and `c` give the position of the elements whose values we wish to set, and `v` the corresponding values of the elements. Running `full` on a sparse matrix gives the full representation of the matrix for use. Note that the code for using `sparse` and `full` to compute the ground truth matrix has already been included in softmaxCost.m.

**Implementation tip: preventing overflows** - in softmax regression, you will have to compute the hypothesis

When the products are large, the exponential function will become very large and possibly overflow. When this happens, you will not be able to compute your hypothesis. However, there is an easy solution - observe that we can multiply the top and bottom of the hypothesis by some constant without changing the output:

Hence, to prevent overflow, simply subtract some large constant value from each of the terms before computing the exponential. In practice, for each example, you can use the maximum of the terms as the constant. Assuming you have a matrix `M` containing these terms such that `M(r, c)` is , then you can use the following code to accomplish this:

% M is the matrix as described in the text M = bsxfun(@minus, M, max(M));

`max(M)` yields a row vector with each element giving the maximum value in that column. `bsxfun` (short for binary singleton expansion function) applies minus along each row of `M`, hence subtracting the maximum of each column from every element in the column.

**Implementation tip - computing the predictions** - you may also find `bsxfun` useful in computing your predictions - if you have a matrix `M` containing the terms, such that `M(r, c)` contains the term, you can use the following code to compute the hypothesis (by diving all elements in each column by their column sum):

% M is the matrix as described in the text M = bsxfun(@rdivide, M, sum(M))

The operation of `bsxfun` in this case is analogous to the earlier example.

### Step 3: Gradient checking

Once you have written the softmax cost function, you should check your gradients numerically. In general, whenever implementing any learning algorithm, you should always check your gradients numerically before proceeding to train the model. The norm of the difference between the numerical gradient and your analytical gradient should be small, on the order of 10^{ − 9}.

**Implementation tip - faster gradient checking** - when debugging, you can speed up gradient checking by reducing the number of parameters your model uses. In this case, we have included code for reducing the size of the input data, using the first 8 pixels of the images instead of the full 28x28 images. This code can be used by setting the variable `DEBUG` to true, as described in step 1 of the code.

### Step 4: Learning parameters

Now that you've verified that your gradients are correct, you can train your softmax model using the function `softmaxTrain` in `softmaxTrain.m`. `softmaxTrain` which uses the L-BFGS algorithm, in the function `minFunc`. Training the model on the entire MNIST training set of 60000 28x28 images should be rather quick, and take less than 3 minutes for 100 iterations.

Factoring `softmaxTrain` out as a function means that you will be able to easily reuse it to train softmax models on other data sets in the future by invoking the function with different parameters.

### Step 5: Cross-validation

Now that you've trained your model, you will cross-validate it against the MNIST test set, comprising 10000 28x28 images. Code has been provided to compute the accuracy (the proportion of correctly classified images) of your model. Our implementation achieved an accuracy of 92%. If your model's accuracy is significantly less (less than 91%), check your code, ensure that you are using the trained weights, and that you are training your model on the full 60000 training images. Conversely, if your accuracy is too high (99-100%), ensure that you have not accidentally trained your model on the test set as well.