# Deep Networks: Overview

### From Ufldl

(→Advantages of deep networks) |
(→Advantages of deep networks) |
||

Line 35: | Line 35: | ||

the network can compute either the logical OR of its inputs (or the OR of the | the network can compute either the logical OR of its inputs (or the OR of the | ||

negation of the inputs), or compute the logical AND. If we have a network with | negation of the inputs), or compute the logical AND. If we have a network with | ||

- | only | + | only one input, one hidden, and one output layer, the parity function would require a number of nodes that |

is exponential in the input size <math>n</math>. If however we are allowed a | is exponential in the input size <math>n</math>. If however we are allowed a | ||

deeper network, then the network/circuit size can be only polynomial in | deeper network, then the network/circuit size can be only polynomial in |

## Revision as of 20:22, 13 May 2011

## Contents |

## Overview

In the previous sections, you constructed a 3-layer neural network comprising
an input, hidden and output layer. While fairly effective for MNIST, this
3-layer model is a fairly **shallow** network; by this, we mean that the
features (hidden layer activations *a*^{(2)}) are computed using
only "one layer" of computation (the hidden layer).

In this section, we begin to discuss **deep** neural networks, meaning ones
in which we have multiple hidden layers; this will allow us to compute much
more complex features of the input. Because each hidden layer computes a
non-linear transformation of the previous layer, a deep network can have
significantly greater representational power (i.e., can learn
significantly more complex functions) than a shallow one.

Note that when training a deep network, it is important to use a *non-linear*
activation function in each hidden layer. This is
because multiple layers of linear functions would itself compute only a linear
function of the input (i.e., composing multiple linear functions together
results in just another linear function), and thus be no more expressive than
using just a single layer of hidden units.

## Advantages of deep networks

Why do we want to use a deep network? The primary advantage is
that it can compactly represent a significantly larger set of fuctions
than shallow networks. Formally, one can show that there are functions
which a *k*-layer network can represent compactly
(with a number of hidden units that is *polynomial* in the number
of inputs), that a (*k* − 1)-layer network cannot represent
unless it has an exponentially large number of hidden units.

To take a simple example, consider building a boolean circuit/network to
compute the parity (or XOR) of *n* input bits. Suppose each node in
the network can compute either the logical OR of its inputs (or the OR of the
negation of the inputs), or compute the logical AND. If we have a network with
only one input, one hidden, and one output layer, the parity function would require a number of nodes that
is exponential in the input size *n*. If however we are allowed a
deeper network, then the network/circuit size can be only polynomial in
*n*.

By using a deep network, one can also start to learn part-whole decompositions. For example, the first layer might learn to group together pixels in an image in order to detect edges. The second layer might then group together edges to detect longer contours, or perhaps simple "object parts." An even deeper layer might then group together these contours or detect even more complex features.

Finally, cortical computations (in the brain) also have multiple layers of processing. For example, visual images are processed in multiple stages by the brain, by cortical area "V1", followed by cortical area "V2" (a different part of the brain), and so on.

## Difficulty of training deep architectures

While the theoretical benefits of deep networks in terms of their compactness and expressive power have been appreciated for many decades, until recently researchers had little success training deep architectures.

The main method that researchers were using was to randomly initialize the weights of the deep network, and then train it using a labeled training set using a supervised learning objective, using gradient descent to try to drive down the training error. However, this usually did not work well. There were several reasons for this.

### Availability of data

With the method described above, one relies only on labeled data for training. However, labeled data is often scarce, and thus it is easy to overfit the training data and obtain a model which does not generalize well.

### Local optima

Training a neural network using supervised learning involves solving a highly non-convex optimization problem (say, minimizing the training error as a function of the network parameters ). When the network is deep, this optimization problem is rife with bad local optima, and training with gradient descent (or methods like conjugate gradient and L-BFGS) do not work well.

### Diffusion of gradients

There is an additional technical reason, pertaining to the gradients becoming very small, that explains why gradient descent (and related algorithms like L-BFGS) do not work well on a deep network with randomly initialized weights. Specifically, when using backpropagation to compute the derivatives, the gradients that are propagated backwards (from the output layer to the earlier layers of the network) rapidly diminishes in magnitude as the depth of the network increases. As a result, the derivative of the overall cost with respect to the weights in the earlier layers is very small. Thus, when using gradient descent, the weights of the earlier layers change slowly, and the earlier layers fail to learn much. This problem is often called the "diffusion of gradients."

A closely related problem to the diffusion of gradients is that if the last few layers in a neural network have a large enough number of neurons, it may be possible for them to model the labeled data alone without the help of the earlier layers. Hence, training the entire network at once with all the layers randomly initialized ends up giving similar performance to training a shallow network (the last few layers) on corrupted input (the result of the processing done by the earlier layers).

## Greedy layer-wise training

How should deep architectures be trained then? One method that has seen some
success is the **greedy layer-wise training** method. We describe this
method in detail in later sections, but briefly, the main idea is to train the
layers of the network one at a time, with the input of each layer being the
output of the previous layer (which has been trained). Training can either be
supervised (say, with classification error as the objective function), or
unsupervised (say, with the error of the layer in reconstructing its input as
the objective function, as in an autoencoder). The weights from training the
layers individually are then used to initialize the weights in the deep
architecture, and only then is the entire architecture "fine-tuned" (i.e.,
trained together to optimize the training set error). The success of greedy
layer-wise training has been attributed to a number of factors:

### Availability of data

While labeled data can be expensive to obtain, unlabeled data is cheap and plentiful. The promise of self-taught learning is that by exploiting the massive amount of unlabeled data, we can learn much better models. By using unlabeled data to learn a good initial value for the weights in all the layers (except for the final classification layer that maps to the outputs/predictions), our algorithm is able to learn and discover patterns from massively more amounts of data than purely supervised approaches, and thus often results in much better hypotheses.

### Regularization and better local optima

After having trained the network on the unlabeled data, the weights are now starting at a better location in parameter space than if they had been randomly initialized. We usually then further fine-tune the weights starting from this location. Empirically, it turns out that gradient descent from this location is also much more likely to lead to a good local minimum, because the unlabeled data has already provided a significant amount of "prior" information about what patterns there are in the input data.

In the next section, we will describe the specific details of how to go about implementing greedy layer-wise training.