Backpropagation Algorithm

From Ufldl

(Difference between revisions)
Jump to: navigation, search
Ang (Talk | contribs)
(Created page with "Suppose we have a fixed training set <math>\{ (x^{(1)}, y^{(1)}), \ldots, (x^{(m)}, y^{(m)}) \}</math> of <math>m</math> training examples. We can train our neural network using ...")
Newer edit →

Revision as of 23:14, 26 February 2011

Suppose we have a fixed training set \{ (x^{(1)}, y^{(1)}), \ldots, (x^{(m)}, y^{(m)}) \} of m training examples. We can train our neural network using batch gradient descent. In detail, for a single training example (x,y), we define the cost function with respect to that single example to be

J(W,b; x,y) = \frac{1}{2} \left\| h_{W,b}(x) - y \right\|^2.

This is a (one-half) squared-error cost function. Given a training set of m examples, we then define the overall cost function to be

&= \left[ \frac{1}{m} \sum_{i=1}^m J(W,b;x^{(i)},y^{(i)}) \right]
                       + \frac{\lambda}{2} \sum_{l=1}^{n_l-1} \; \sum_{i=1}^{s_l} \; \sum_{j=1}^{s_{l+1}} \left( W^{(l)}_{ji} \right)^2
&= \left[ \frac{1}{m} \sum_{i=1}^m \left( \frac{1}{2} \left\| h_{W,b}(x^{(i)}) - y^{(i)} \right\|^2 \right) \right]
                       + \frac{\lambda}{2} \sum_{l=1}^{n_l-1} \; \sum_{i=1}^{s_l} \; \sum_{j=1}^{s_{l+1}} \left( W^{(l)}_{ji} \right)^2

The first term in the definition of J(W,b) is an average sum-of-squares error term. The second term is a regularization term (also called a weight decay term) that tends to decrease the magnitude of the weights, and helps prevent overfitting.

[Note: Usually weight decay is not applied to the bias terms b^{(l)}_i, as reflected in our definition for J(W,b). Applying weight decay to the bias units usually makes only a small different to the final network, however. If you took CS229, you may also recognize weight decay this as essentially a variant of the Bayesian regularization method you saw there, where we placed a Gaussian prior on the parameters and did MAP (instead of maximum likelihood) estimation.]

The weight decay parameter λ controls the relative importance of the two terms. Note also the slightly overloaded notation: J(W,b;x,y) is the squared error cost with respect to a single example; J(W,b) is the overall cost function, which includes the weight decay term.

This cost function above is often used both for classification and for regression problems. For classification, we let y = 0 or 1 represent the two class labels (recall that the sigmoid activation function outputs values in [0,1]; if we were using a tanh activation function, we would instead use -1 and +1 to denote the labels). For regression problems, we first scale our outputs to ensure that they lie in the [0,1] range (or if we were using a tanh activation function, then the [ − 1,1] range).

Our goal is to minimize J(W,b) as a function of W and b. To train our neural network, we will initialize each parameter W^{(l)}_{ij} and each b^{(l)}_i to a small random value near zero (say according to a Normal(0,ε2) distribution for some small ε, say 0.01), and then apply an optimization algorithm such as batch gradient descent. Since J(W,b) is a non-convex function, gradient descent is susceptible to local optima; however, in practice gradient descent usually works fairly well. Finally, note that it is important to initialize the parameters randomly, rather than to all 0's. If all the parameters start off at identical values, then all the hidden layer units will end up learning the same function of the input (more formally, W^{(1)}_{ij} will be the same for all values of i, so that a^{(2)}_1 = a^{(2)}_2 = a^{(2)}_3 = \ldots for any input x). The random initialization serves the purpose of symmetry breaking.

One iteration of gradient descent updates the parameters W,b as follows:

W_{ij}^{(l)} &= W_{ij}^{(l)} - \alpha \frac{\partial}{\partial W_{ij}^{(l)}} J(W,b) \\
b_{i}^{(l)} &= b_{i}^{(l)} - \alpha \frac{\partial}{\partial b_{i}^{(l)}} J(W,b)

where α is the learning rate. The key step is computing the partial derivatives above. We will now describe the backpropagation algorithm, which gives an efficient way to compute these partial derivatives.

We will first describe how backpropagation can be used to compute \textstyle \frac{\partial}{\partial W_{ij}^{(l)}} J(W,b; x, y) and \textstyle \frac{\partial}{\partial b_{i}^{(l)}} J(W,b; x, y), the partial derivatives of the cost function J(W,b;x,y) defined with respect to a single example (x,y). Once we can compute these, then by referring to Equation~(\ref{eqn-costfunction}), we see that the derivative of the overall cost function J(W,b) can be computed as

\frac{\partial}{\partial W_{ij}^{(l)}} J(W,b) &=
\left[ \frac{1}{m} \sum_{i=1}^m \frac{\partial}{\partial W_{ij}^{(l)}} J(W,b; x^{(i)}, y^{(i)}) \right] + \lambda W_{ij}^{(l)}, \\
\frac{\partial}{\partial b_{i}^{(l)}} J(W,b) &=
\frac{1}{m}\sum_{i=1}^m \frac{\partial}{\partial b_{i}^{(l)}} J(W,b; x^{(i)}, y^{(i)}).

The two lines above differ slightly because weight decay is applied to W but not b.

The intuition behind the backpropagation algorithm is as follows. Given a training example (x,y), we will first run a ``forward pass to compute all the activations throughout the network, including the output value of the hypothesis hW,b(x). Then, for each node i in layer l, we would like to compute an ``error term \delta^{(l)}_i that measures how much that node was ``responsible for any errors in our output. For an output node, we can directly measure the difference between the network's activation and the true target value, and use that to define \delta^{(n_l)}_i (where layer nl is the output layer). How about hidden units? For those, we will compute \delta^{(l)}_i based on a weighted average of the error terms of the nodes that uses a^{(l)}_i as an input. In detail, here is the backpropagation algorithm:

1. Perform a feedforward pass, computing the activations for layers L2, L3, and

so on up to the output layer L_{n_l}.

2. For each output unit i in layer nl (the output layer), set
= \frac{\partial}{\partial z^{(n_l)}_i} \;\;
        \frac{1}{2} \left\|y - h_{W,b}(x)\right\|^2 = - (y_i - a^{(n_l)}_i) \cdot f'(z^{(n_l)}_i)
3. For l = n_l-1, n_l-2, n_l-3, \ldots, 2
For each node i in layer l, set

                 \delta^{(l)}_i = \left( \sum_{j=1}^{s_{l+1}} W^{(l)}_{ji} \delta^{(l+1)}_j \right) f'(z^{(l)}_i)
4. Compute the desired partial derivatives, which are given as:
\frac{\partial}{\partial W_{ij}^{(l)}} J(W,b; x, y) &= a^{(l)}_j \delta_i^{(l+1)} \\
\frac{\partial}{\partial b_{i}^{(l)}} J(W,b; x, y) &= \delta_i^{(l+1)}.
Personal tools